Clean your hands and tools.

         Remove the bezel around the inside door handle, push up and pull the bottom, when it releases, push down and pull hard to release the top. Pull with both hands, don't use any tools, you may break the plastic bezel. Remove the small plastic that covers a screw, use your nail

Remove the screw with a Torx bit.

         Use a tool like the one in the picture or if you use a screwdriver, make sure you get right next to the clips and separate them from the door, take care so you don't break the clips or the door panel ($$$$$).

Get your hands behind the panel and pull straight out until all the clips are released from the door.

Grab the panel with both hands and push it straight up until it clears the lock.

         Now you can see the insides of the door, disconnect the light, the power window switch and move the panel to a safe location.
You can see the clips better now. Make sure they did not break or the panel.